NESTFORGE by MADEGRAIN
Acrylic case nesting example / Acryl-Gehaeusebeispiel
20 September 2026

Open START-HERE-EN.html or HIER-STARTEN-DE.html for the illustrated guide.
Die gestaltete Anleitung findest du in HIER-STARTEN-DE.html.
Both documents work offline and contain all instructions, quantities and credits.

Free example: one-sheet.nest (8 pieces, 1 sheet, 900 x 600 mm).
Comparison: two-sheets.nest (same 8 pieces, 2 sheets, 600 x 400 mm).
The second project needs a full license to recalculate/export; supplied results are included.

input/ = prepared input DXFs. original/ = unchanged upstream DXFs.
exports/ = actual DXF (strict R12 POLYLINE), SVG and PDF outputs.
DXF contains part contours only. SVG/PDF include the sheet frame for reference.
This is a digital nesting example; the source enclosure has not yet been physically built.

Case design: JasensCustoms.com, FightStickLayoutProject.
Prepared projects, layout illustrations and guide: Madegrain.
CC BY-SA 4.0 applies to the case-derived examples and guide.
No endorsement by the original designer is implied.
The license does not grant trademark rights in the Madegrain/NestForge brand.
Full license: LICENSE. Original credits: NOTICE.md. Original construction notes: UPSTREAM-CASE-README.md.
Changes: CENTERX2 construction duplicates removed from top/bottom; sides unchanged.
Project contours translated to local origin without scaling. Layout colors added only in guide.
Source revision: d86b5fbc7fb8b03896b8c41c91b7898a2b663242
Source: https://github.com/JasensCustoms/FightStickLayoutProject/tree/d86b5fbc7fb8b03896b8c41c91b7898a2b663242/case
License: https://creativecommons.org/licenses/by-sa/4.0/
